Preparation

The surface must be clean, smooth, dry and free from wax, dust and contaminants.
SHAKE WELL BEFORE USE
Application
Pour the Ring Remover onto a lint free cloth and rub with pressure over the mark in the direction of the grain until the mark is removed.
If the mark does not disappear apply more Ring Remover to the cloth and continue rubbing until the mark is removed.
Buff with a clean cloth and then wax if required.
For deeper marks the Ring remover can beapplied with Rustins Fine Steel Wool (grade0000).
For satin or matt finishes the same grade of steel wool may be used to matt the surface down after the Ring Remover has been used as it may produce a shiny surface.

Maintenance
Re-apply when necessary.

Shelf-life/Storage
Many years if stored in original, tightly closed container in normal conditions.
Protect from frost.

Hazards
Non-flammable. Flash point: Nil. Avoid contact with eyes, skin and clothing. Wash hands after use and dry them. A Full Safety Data Sheet is available upon request or on www.rustins.co.uk

Clean-Up
Warm soapy water.

RUSTINS RING REMOVER 125ML

THIS ITEM IS ONLY AVAILABLE IN STORE