LIBERON WAX AND POLISH REMOVER

Liberon Wax and Polish Remover removes old wax, dirt, smoke and everyday grime from antique and modern wood furniture and interior wood work (including doors, beams, dado rails, and banisters) without harming the original finish and patina.

Removes wax and grime and cleans all interior wood
Suitable for use on French polishes, varnish, lacquer and oil finishes
Unique formula should not lift veneers or raise grain
Suitable for delicate surfaces
Easy to use
Leaves the surface ready for re-finishing
Approved by the Guild of Master Craftsmen

Application

For best results soak a pad of Liberon Ultra Fine Steel Wool (0000) in Wax and Polish Remover, squeeze out the excess and gently wash the surface going with the grain where possible
Allow a few minutes for the Wax and Polish Remover to work, then while the surface is still wet use a clean lint-free cloth to wipe off all the old softened wax
Repeat this process until all the old wax is removed
Allow 24 hours for the treated surface to dry completely before re-finishing
Important: This product may lift newly applied French polishes, lacquers, varnishes and sealers. Always test product on a spare surface or inconspicuous area for colour, compatibility and end results

Precautions

Wear suitable heavy duty gloves
Do not pour into plastic containers or use on plastic or vinyl surfaces
Dispose of used steel wool and cotton cloths outside to reduce vapour build-up and fire hazard
Do not use on water based varnish

LIBERON WAX & POLISH REMOVER 1L

THIS ITEM IS ONLY AVAILABLE IN STORE