LIBERON NATURAL FINISH FLOOR VARNISH

A hard wearing and long lasting varnish which is ideal for use on soft or hard wood flooring. Keeping the natural feel and look of the timber Natural Finish Floor Varnish uses a non-yellowing and quick drying formula.

Maintains the natural feel and look of the timber
European Eco-label scheme approved
Water based, low VOC
Highly resistant to scratches and stains
Provides a hard, durable and long lasting finish
Quick drying
Ideal for soft and hard woods
EN71 Part 3 Approved – Safe for toys
Endorsed by the Guild of Master Craftsmen

Preparation

Sand the floor if required and remove all previous finishes
Ensure the surface is clean, dry and dust free
If you want to colour the wood you can apply Liberon Wood Floor Dye to the timber before varnishing
Alternatively Liberon Wood Floor Dye may be added to the varnish to create unique colour tones
Add one 250 ml Liberon Wood Floor Dye to one 2.5L tin of Natural Finish Floor Varnish
Liberon Wood Floor Dye is available in a range of wood shades

Application

Shake / stir well before use
Apply a reasonable coat of varnish evenly using a paint brush or short hair roller and allow to dry for a minimum of 2 hours before applying further coats
We recommend a minimum of 3 coats are applied, sanding lightly between coats if required
More coats may be required for heavy traffic areas
Allow the final coat of varnish a minimum of 24 hours drying time before using the floor
Important: Always test product on a spare surface or inconspicuous area for colour compatibility and end result
Product may slightly darken some woods

Cleaning and maintenance

Wipe any spills immediately
For general maintenance wipe over with a damp mop or cloth using a mild detergent if required
If the surface shows signs of wear re-apply a coat of varnish or coat with Liberon Wood Floor Reviver

Precautions

Allow all wood dyes to dry for a minimum of 8 hours before applying Natural Finish Floor Varnish.
Care must be taken on the application of the first coat of Natural Finish Floor Varnish when being used over Liberon Wood Floor Dye
Keep brush strokes to a minimum as over brushing may lift out the colour
The varnish may raise the grain on some hard woods
Do not exceed a 10% dilution of Natural Finish Floor Varnish with Liberon Wood Floor Dye (250 ml Dye to 2.5 L Varnish)
span style="font-size: small;" data-mce-mark="1">Natural Finish Floor Varnish is not suitable for applying over an oil based sealer
For a more durable finish we recommend Liberon Wood Floor Dye is only added to the varnish for the first coat and that subsequent coats are varnish only

USAGE

Do not mix with solvent based dyes.

Eco- Label
Natural Finish Floor Varnish is approved to the European Eco-label for Indoor Paints and Varnishes a limitation of air pollution by solvents the absence of heavy metals and substances harmful for the environment and health
reduced sulphur emissions during production good performance for indoor use

VOC Information
EU limit value for Natural Finish Floor Varnish (CatA/I): 140 g/L (2007) / 140 g/L (2010). Natural Finish Floor Varnish contains Max 0.5 g/L VOC.

Liberon advice
In order to avoid bubbles forming on the surface of the varnish when using a roller we recommend the use of a short hair roller and that work is not carried out at temperatures above 25°C
Apply varnish plank by plank while facing the sunlight
Start in the corner of the room and work back towards the door
Apply successive coats in a criss-cross format. (right to left then left to right) applying the final coat in the direction of the grain

LIBERON NATURAL FLOOR VARNISH

THIS ITEM IS ONLY AVAILABLE IN STORE