LIBERON FLOOR SEALER

Liberon Floor Sealer is a natural, oil based finish for wood and parquet floors. It enhances the natural colour of new and old wood and is water, heat and alcohol resistant.
Floor Sealer can be used alone to achieve a final satin to gloss finish, or as a sealer prior to waxing or varnishing with Liberon’s range of floor finishing products. It is also suitable for sealing unvarnished cork surfaces.

Oil based sealer for wood and parquet flooring
Enhances the natural colour of new and old wood
Seals floors prior to waxing and varnishing
Helps protect against stains and scratching
EN71 Part 3 Approved – Safe for toys
Endorsed by the Guild of Master Craftsmen

Preparation

Sand the floor if required and remove all previous finishes
Ensure the surface is clean, dry and dust free
If you wish to colour the wood use Liberon Wood Floor Dye prior to applying Floor Sealer

Application

Shake the container well before use
Apply a reasonable coat of Floor Sealer with a brush, roller or cloth.
Allow the oil to penetrate for 5-10 minutes then remove the excess with a dry lint-free cloth
We recommend a minimum of 3 coats allowing 5 hours between coats
Additional coats may be required on porous surfaces or to achieve a higher finish
Liberon Floor Wax or High Resistance Varnish may be applied after sealing, please allow 24 hours for the last coat of Floor Sealer to harden before applying
Important: Oil finishes bring out the natural colours of the timber. A wet surface will be an indication of the final colour
Always test product on a spare surface or inconspicuous area for colour compatibility and end
result

Cleaning and maintenance
Surfaces should be swept or vacuumed and may be cleaned with a damp cloth. Any spills should be wiped up immediately. For stubborn stains a mild detergent can be used, alternatively lightly sand the affected area to remove the stain and then re-apply Floor Sealer. When using Floor Sealer alone surfaces may need to be re-sealed once a year, or more frequently in areas of high foot traffic.

Precautions

Allow all wood dyes to dry for a minimum of 8 hours before applying Floor Sealer.
Do not use on vinyl or similar floor coverings.
This product may dissolve bitumen-based adhesives.
Oily cloths may self combust. Do not leave impregnated cloths in bundles. Before discarding lay
them flat outside to dry to avoid a fire hazard.

LIBERON FLOOR SEALER 1L

THIS ITEM IS ONLY AVAILABLE IN STORE