Briwax Spray Wax is a 'surface shine and spray polish' recommended for antique and reproduction finishes. Use on hardwoods such as Teak, Oak, Mahogany or Walnut to give added depth to old and tired surfaces.

Briwax Spray Wax can also be used as an 'all in one' top coat finish on new wood, either soft or hard, but is not recommended for exterior use. It contains the same blend of waxes as Briwax Original and can be used in the same way instead of a hard paste wax on all interior wood. It can also be used for the regular maintenance of furniture. Briwax Spray Wax contains no surfactants, silicones or soaps, using the natural cleaning abilities of the waxes contained in the spray.

Before use, make sure the surface is clean and dry. It is possible to use Briwax Spray Wax on previously waxed surfaces. On finished or sealed wood spray from a distance of 40-50cm and allow to dry for 2-3 minutes. The wax can then be buffed to a shine with a soft clean cloth.
If applying to unfinished wood, spray from the same distance but work the wax into the surface with a clean cloth while it is still wet. Allow 4-5 minutes drying time then buff to a semi gloss finish. A single coat is usually enough but a second coat can be applied after a few minutes if a higher sheen is required.

Do not use if the temperature drops below 15°C or exceeds 25°C. This wax will keep for a long time when stored in a cool dry place with the lid firmly attached.

Quick, and easy to use
Makes the wood feel silky and smooth
Produces a semi-gloss finish on raw timber
Wax shine on finished wood
Contains no silicones
Fresh smell
Cleans and revitalises

BRIWAX SPRAY

THIS ITEM IS ONLY AVAILABLE IN STORE